Soil Testing Equipment

Ductility Testing Apparatus

We are passionately engaged in providing a wide assortment of Ductility Testing Apparatus. This testing apparatus consists of a water bath with a thermostatic heater and a circulating pump in order to maintain uniform water temperature. These are electrically operated and are developed with the help of supreme technology. We charge industry leading rates to clients.

 

Specifications:

 

  • The briquette is stretched at a rate of 50 mm./minute ±25mm per mount at a temperature of 25oC ± 0.50C
  • The apparatus consists of a water bath with a the heater, and a circulating pump to maintain uniform water temperature.
  • One half of the briquette moulds is fixed on a fixed plate in the water bath, the other half of the briquette mould is fixed to a carrier which slides over a rotating threaded shaft with a clutch.
  • The motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath.
  • A pointer fixed to the carrier moves over a scale graduated from 0-110 cm x 1 mm fixed on the bath with “0” (zero) of the scale towards the fixed plate side.
  • The rotating shaft has 2 speeds of travel for the bracket, 5 cm/min and 1 cm/min., selected by a clutch.
  • Water bath inside is Stainless Steel, it is an insulated water bath. Water bath is provided with a drain.
  • A heater with thermostatic control is fixed inside the water bath.
  • Control switches for motor, stirrer, heater and indicator lamps are fixed at a convenient place on the water bath, complete with two briquette moulds and one base plate, all made of brass. Operates on 230 volts A.C. single phase.
  • ASTM: D 113, (Thermostatic Controller)

 

Accessories :

 

  • Ductility mould with base plate
  • Briquette Mould ----- 2 Nos

Vibrating Machine

With the assistance of skilled and experienced professionals, we offer our clients an extensive range of Vibrating Machine. These are manufactured in various specifications of ceramic capacity, volume, and so forth. These are ideal for polishing metal parts and also facilitate three dimensional vibrating. These are for the Concrete moulds are cast by using a tamping bar or a vibrating table. However air trapped in cement mortar paste can not be thus removed while casting cement mortar moulds. This is is offered at industry leading prices.

 

Specifications:

 

  • The machine consists of a vibrating frame assembly and an electric motor mounted on a sturdy base
  • The complete frame assembly consists of a vice to hold a 7.06 cm cube mould and two studs threaded at top and a hopper to feed the sample in the mould
  • This assembly is supported on four springs and has an in built rotating shaft which rotates eccentrically and thus imparts vibrations to the entire frame
  • A balance weight is an integral bottom part of the frame
  • The center of gravity of the assembly is brought to the center of the eccentric shaft or within a distance of 25 mm below it
  • The electric motor drives the shaft of the frame and thus imparts required vibrations to the mould
  • The frequency of vibration is 12000 ±400 vibration per minute
  • Supplied complete with on 7.06 cm cube mould with loose base plate, a time switch 0-5 mins x 1 min and certificate of vibration from a standard laboratory
  • IS. 4031 – 1968, IS: 1344- 1959

 

Spare:


  • Belt
  • Poking rod wooden
  • Poking rod rubber

Compression Testing Machine

Compression Testing Machine having adjustable rate of Loading and auto cut off mechanism which will stop the machine a little before reaching its maximum load all the electrical fittings including motor used will be of standard make, fitted with digital load indicator of capacity 2000 KN with least count 1 KN , having peak load hold facility and RS 232 port for computer connectivity


Specifications:

  • Capacity 200 Tonnes (2000 KN) Electrically Cum Manually Operated
  • Suitable to test concrete cubes of 15 X 15 x 15 cm
  • And cylinders of 15 X 30 cm
  • 4 pillar type load frame
  • Specimens duly hardened and surface grinded for excellent smooth finish
  • Suitable to operate on 220/230 V single phase

Motorized California Bearing Ratio Apparatus

We are manufacturer and exporter of Motorized California Bearing Ratio Test Apparatus is used to determine the bearing capacity of soils quickly and efficiently and determining the load carrying capacity in the field. The C.B.R. Method is used for finding the relative bearing ration and expansion characteristics of soil of base, sub base and sub grade for the design of roads, pavements and runways.


Specifications:


  • Test can be made on all types of soils including sand, gravel, crushed stone etc. C.B.R. test is used extensively for selection of materials and control of sub-grades.
  • The procedure of test is very simple.
  • A 50 mm dia penetration piston is forced in the test soil and
  • loads required for the penetration to penetrate different depth are recorded by means of a proving ring fixed to the penetration piston assembly and a dial gauge.
  • CBR Load Frame 50 kn Electrically operated two Speed
  • ASTM D 1883


Standard Accessories:


  • CBR Mould
  • Perforated Base Plate
  • Extension Collar 150 mm
  • Spacer Disc
  • Annular Surcharge Weight
  • Slotted Surcharge Weight
  • Perforated Plate
  • Metal Tripod
  • Cutting Collar
  • Rammer 4.89 kg
  • Proving Ring with dial gauge

Motorized Centrifuge Extractor

We are a promising manufacturer and exporter engaged in offering wide collection of Motorized Centrifuge Extractor. This instrument is used for determination and checking of bitumen percentage in bituminous mix, the mix is added with a Solvent and dissolved bitumen is removed by centrifugal action. These products have been priced at very reasonable rates in the market and they are used in a various industries for several applications.


Specifications:


  • Capacity: 3000 ml
  • Operates on A.C. single phase: 230 volts
  • Consists of a removable aluminum rotor bowl, capacity 3000 grams
  • This shaft and thus the bowl is rotated fast manually by enclosed gears in the cast body and handle.
  • An electric motor and gear rotate same as above but shaft.
  • A drain is provided to collect dissolved bitumen coming out of the rotating bowl and getting collected in the housing.
  • An electric motor and gear rotate same as above but shaft.
  • Care is taken to prevent solvent entering into the rotor of electrical motor.
  • Operates on 230 volts A.C. single phase
  • ASTM D 2172-05

Compression Testing Machine Hand Operated Channel

Compression Testing Machine Hand Operated Channel Strength of Concrete is a very important aspect during construction. Strength of concrete is obtained by crushing the specimen in from of cubes or cylinders. Engineers carefully design concrete for a particular compressive strength and specimen is tested by applying load in a compression Testing Machine. Where carrying frequently the specimens for testing in a standard laboratory is inconvenient and uneconomical. With special attachments, the machines can also be used for solid concrete blocks, using appropriate capacity machine. In general a Compression Testing Machine consists of Load Frame with suitable platens and a Pumping Unit with Pressure gauge, either hand operated or electrically cum hand operated. Load frame and Pumping unit are connected by pressure pipes.


Specifications:


  • Capacity: 1560 kn

LE Chatelier Mould

We are a trusted name that is involved in the manufacturing and exporting of high quality of LE Chatelier Mould (Complete 6 Set). It is used for the determination of soundness by expansion method of ordinary and rapid hardening Portland cement, low heat Portland cement and class A lines. Customers can avail these LE Chatelier Mould at standard market prices.

 

Specifications:

 

  • It consists of a small split cylinder forming a mould
  • On either side of the split cylinder, two parallel indicating arms with pointed ends are attached
  • Supplied complete with two glass plates and a lead weight
  • Packing: set of 6 pcs
  • IS : 269,712, 5514, 1727

Slump Test Apparatus

We are engaged in manufacturing a wide range of Slump Test Apparatus which is fabricated using high grade raw material. This apparatus is used to determine the consistency of concrete. The apparatus is then inverting over a flat plate and removing the mold to measure the slump. Moreover, we offer this product to our client in a very reasonable price rates.

 

Specifications:

  • The Apparatus consists of one slump cone with handles and foot pieces
  • The slump cone has internal dimensions 20 mm dia at base 10 cm top dia and 30 mm height
  • Foot pieces can be fixed to the clamps on the base plate
  • The base plate has lifting handle for easy transportation
  • One graduated steel rod 16 mm dia x 600 mm long rounded at one end and graduated in mms, is also supplied
  • It is used for the determination of the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38 mm
  • IS : 6932

Los Angles Abrasion Machine

We are manufacturer and exporter of Los Angles Abrasion Machine. Los Angeles Abrasion Testing Machine is used for testing crushed slag, crushed and uncrushed gravel for resistance to abrasion. Known for its longer functional life and fine finish, the entire range of the abrasion testing machines offered by us is highly regarded in the market. Moreover, this machine are offered as per the customers requirement in a very nominal price rates.

 

Specifications:

 

  • This machine is for determining are resistance to bear of small size Course Aggregate and Crushed rock the machine consistence of a hollow cylinder mounted one sturdy frame on ball bearings a detachable shelf which extends which stand through out the inside length of the drum catches the abrasive charge and dose not allow its two fall on the cover the drum is rotated at a speed of 30-33 RPM by an electric motor through a heavy duty reduction gear motor is suitable for operation on 220 Volts-50 Hz, 1 ph
  • Supplied complete with a tray for collection of the materials with abrasive charge
  • Abrasive Charge: Consists of set of 12 hardened steel ball of 48 mm dia
  • Optional: Revolution Chamber
  • IS : 2386 (Part IV ) ASTM : C 131

Sand Pouring Cylinder

We are a reckoned manufacturer and exporter of an extensive range of Sand Pouring Cylinder.
This apparatus is used for the in place determination, of the dry density of compact, fine and medium grained soil. In addition to this, our products are available in various sizes, shapes and designs at most competitive prices to fulfill the diverse requirements of our customers.


Specifications:

 

  • Small Sand Pouring cylinder, 3 liter capacity, fitted with conical funnel and shutter. Cylinder calibrating container, internal dia 10 cm and internal depth 15 cm fitted with a flange, Metal tray, 30 cm
  • Square and 4 cm deep with a 10 cm dia hole in the center
  • Size: 150 mm
  • This apparatus is used for the place determination. of the dry density of compact, fine and medium grained soils and for layers not exceeding 50 cm thickness
  • Accessories: Metal tray, 30 cm square and 4 cm deep with hole. Test forms pad of 50
  • IS : 2720(Part XXVIII) – 1966

Plastic Limit Set

Owing to the technologically advanced manufacturing facilities, we have been able to offer a range of Plastic Limit Sets. Plastic Limit Set ensures wide industrial applications. We offer this product to our customers in a very reasonable price rates.


Specifications:

 

  • IS : 2720 (Part – VII)
  • Moisture contents at which soil has smallest plasticity is called limit
  • For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled into a thread of Dia: 3 mm

 

The complete set consists of one each:

 

  • Glass plate 20 cm x 115 cm having ground ends and one side frosted. --------- 1 pcs
  • stainless steel rod 3 mm dia x 150 mm long.----1 pcs
  • Flexible spatula.------ 1 Pcs
  • Set of 6 moisture containers. -----6 pcs
  • Porcelain dish 150 mm dia. ------1 pcs
  • Plastic wash bottle 500 ml.--------1 pcs

Cylindrical Mould

We are manufacturers, traders and exporters of Cylindrical Mould. Available in different dimensions, our offered mould is precisely manufactured at vendors’ end using quality tested raw material and ultra-modern technology. Used for testing concrete cylinders for compressive strength tests. Customers can avail these moulds from us in various sizes at leading market prices.


Specifications:

 

  • Size: 150 x 300 mm

Vicat Needle Apparatus

We offer Vicat Needle Apparatus that is widely used in determining the normal consistency and setting time of cement. Provided with consistency plunger, final set needle and in initial set needle, this offered apparatus is easy to operate. It is manually operated according to the need.

 

Specifications:

 

  • The apparatus consists of a metallic frame bearing a freely movable rod with a cap at top, one vicat mould
  • Split type and glass base plate and one set of needles one each initial needles, final needle and consistency plunger
  • This instrument is used for determining the normal consistency and setting times of cement and ‘A’ Class limes
  • ASTM C191

 

Spare:

 

  • Vicat Mould Brass
  • Vicat Mould Split Type
  • Initial Needle
  • Final Needle
  • Plunger
  • Metallic Base Plate

Blaine's Air Permeability Apparatus

We are known for the manufacturing and exporting of the Blaine's Air Permeability Apparatus to our client. The apparatus is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. These products are easy to install and maintain. These products are known for its dimensional accuracy and compact design.

 

Specifications:


  • BS : 4359
  • The apparatus consists one each of permeability cell 12.5 mm I.D.
  • Manometer ‘U’ type mounted on stand
  • Stainless Steel cell with Perforated disc plunger Rubber stopper
  • Rubber tube 30 cm long
  • Packet of 12 filter paper discs
  • The apparatus is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement.
  • This is a variable flow type air permeameter.

Direct Shear Apparatus Single Speed Hand Operated

We are known for the manufacturing and exporting the Direct Shear Apparatus Single Speed Hand Operated. We offer these products to our client as per their specifications. Avail these at market leading price rates.

 

Loading unit :


  • Supplied with load yoke with direct and lever system for applying load.
  • Normal stress capacity 8 kg/sq. cm.
  • Load is applied either directly or through a counter balanced detachable lever.
  • Provision is made for the load to be applied either through a steel ball recessed in the loading pad or direct through a boss on the pre calibrated loading yoke.
  • The loading unit is provided with V strips and roller strips for frictionless movement of shear box housing.

Shear box assembly :

 

  • Comprising direct shear box in two halves for a square specimen size 60 x 60 x 25 mm one pair of plain gripper plates, One pair of perforated gripper plates, one pair of porous stones, one top of loading pad.


Shear box housing:

 

  • Accommodates the direct shear box assembly.
  • Complete with two ball roller strips.
  • Specimen cutter : for cutting 60 x 60 x 25 mm.
  • Specimen form larger samples. Set of weights to give a normal stress of 3 kg2 / cm.
  • Through larger as following : -
    To give kg / cm. 0.05,Qty. 4 nos.
    To give kg/cm. 0.1,Qty. 1 no.
    To give kg/cm. 0.2,Qty. 1 no.
    To give kg/cm. 0.5,Qty. 3 nos.
    To give kg/cm. 1.0,Qty. 1 no.
  • Net weight 140 kg.

Sieve Shaker

We are the leading manufacturer, trader and exporter of the Gyratory Motorized Sieve Shaker. Characterized by powerful motor and magnificent capacity, this series is also famous in the industry for its consistent operation and ease of maintenance.


Specifications:


  • Carries upto 7 sieves of 200mm or 300mm diameter
  • The shaker is driven by Motor through a reduction gear immersed in oil
  • The sieve table does not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction
  • If the stop pin-below the table is removed, the shaker can have a rotary motion
  • In addition to this gyrator motion of the table, there is a pair of rods and a holder are supplied Power supply 220 V, Single Phase, 50/60 Hz
  • Adaptor for 30 cm diameter sieves
  • Time switch 0-60 min in 5 min graduation

Liquid Limit Device

We offer Liquid Limit Device, which are used to determine the liquid limit of soil, determine the plasticity index and clayness of soil. These consist of brass cup held on an adjustable bracket. The cup can be adjusted for a fall of 1 cm and can be raised and dropped on a rubber base of standard hardness by cam action. Further, our range is complete with one casagrande grooving tool, one ASTM grooving tool and a height gauger block of type A of AIS 9259.

Specifications:


  • It consists of a brass cup held on an adjustable bracket.
  • The soil at the water content has some strength which is about 0.17 N/cm2 (17 gm / cm2)
  • The cup can be adjusted for a fall of 1cm and can be raised and dropped on a rubber base of standard hardness by cam action.
  • Complete with one casagrande grooving tool, one ASTM Grooving tool and a high gauge block
  • Hand Operated ASTM D 4318

 

Application areas:


  • Construction of roadways, buildings etc.
  • Agriculture
  • Fertilizers
  • Mining

    Speedy Moisture Meter

    Capitalizing on the proficiency of our procuring professionals, we have been able to offer an extensive range of Speedy Moisture Meters. Designed in highly polished wooden carrying case with handle, the system assembly is comprised of various components. We avail this product to our client in a very affordable price rates.


    Specifications:

     

    • A pressure vessel with clamp for sealing cap, capacity is 20gms
    • Rubber sealing gasket
    • Pressure gauge calibrated in percentage moisture content 0-25% x 25% on the wet weight basis, on electronic balance for weighing sample
    • A scoop for measuring carbide reagent
    • A bottle of reagent
    • One cleaning brush and a set of 4 steel balls for through mixing
    • Model - ASTM D 4944

    Triaxial Shear Test Apparatus

    We offer the Triaxial Shear Test Apparatus to our client. The settlement of foundations and changes in earth pressure due to movement of retaining walls or other earth supports, the yield of soil caused by application of load, are affected by the stress-strain relationship of soils. Triaxial Shear Test Apparatus with motorized single speed with load frame.


    Specifications:

     

    • For determining the triaxial shwar strength of soil specimens of 28 mm diameter
    • The length to diameter ratio of sample is 1:2
    • One loading unit, for single unit, for single cell mounting, capacity 5 tonnes
    • The loading unit is supplied with one dial gauge bracket
    • One Triazial cell for 38 mm dia specimen, stationary bushing
    • Lateral pressure assembly 0-10 mm x 25 mm for strain measurement
    • One high sensitive proving ring, capacity 200/250kg with Calibration Report and carrying case
    • High sensitivity proving Ring, capacity 1000 kg

    Rapid Moisture Meter

    Engineered with utmost precision and perfection, the range of Rapid Moisture Meter that we offer can be availed in different technical parameters and specifications based on the diverse requirements of the clients. Designed in polished wooden carrying case with handle, these meters are offered with listed below specifications.

     

    Specifications:

     

      • Pressure vessel with clamp for sealing cap
      • Rubber sealing gasket
      • Pressure gauge calibrated in percentage moisture content 0-25% x 1% on the wet weight Counter poised balance for weighing sample
      • Scoop for measuring carbide reagent
      • Bottle for thorough mixing

        Slump Test Apparatus

        Our range of Slump Test Apparatus are used for the determination of the consistency of freshly mixed concrete where the maximum size of the aggregate does not exceed 38mm. These consist of one slump cone with handles and foot pieces.

        Specifications:

        • Slump cone with internal dimension of 20mm diameter at base, 10cm top diameter and 30mm height
        • Foot pieces are available, which can be fixed to the clamps on the base plate
        • Base plate has lifting handle for easy transportation
        • One graduated steel rod 16mm diameter x 600 mm long rounded at one end.

        Aggregate Crushing Value Test Apparatus

        We offer the wide range of the Aggregate Crushing Value Test Apparatus. The aggregate crushing value provides a relative measure of the resistance of an aggregate to crushing under a gradually applied compressive load. Attributing to its durability and resistance to abrasion, the entire range of the aggregate crushing value apparatus offered by us is widely praised.


        Size:

         

        • 75 mm
        • 150 mm

        CBR Mould AS Per BS

        Being a well-established organization, we are offering premium quality of CBR Mould AS Per BS. These molds form the part of an equipment that are used in the laboratory evaluation of sub-base course and sub-base grade material in road construction. It can be operated manually as well as electronically.

        Features:


        • Excellent durability
        • Robust construction
        • High strength

        Cube Mould

        We are best name in the market offering perfect quality assortments of Cube Mould. Offered mould is designed to cater the demands of various engineering industries. Our provided mould is manufactured using high grade raw material and innovative technology with the quality norms. They are checked along side with many quality norms to keep it as per set quality norms. They are affordable in rate

         

        Specifications:

         

        • Size: 150 x 150 x 150 mm
        • Weight: 9 kg
        • Material: Made of Cast Iron
        Looking for Soil Testing Equipment ?
        Share Us:
        © Scientific International
        Desktop Site Back to top